表面解吸常压化学电离质谱法直接分析牙齿微区表面

采用纳升取样表面解吸常压化学电离质谱法(nano-SDAPCI-MS)结合主成分分析(PCA),建立了一种采用具有微米级针尖的金属取样针直接对龋齿不同部位取样并进行快速质谱分析的方法.数据分析结果表明,同一颗龋齿不同部位的质谱指纹谱图之间存在差异;在不需要样品预处理的前提下通过串联质谱快速测定了龋齿中的乳酸、丙酮酸、苯乙酸和丙酸等成分.采用PCA方法可较好地将龋齿病灶位置与邻近正常组织进行区分,也可对不同牙病及健康牙齿进行区分.本方法可方便地对牙齿进行直接微区分析,为鉴别牙齿疾病及观测治疗效果提供了一种快速、简单的方法,为生物体中微细部位的快速取样及直接质谱分析提供了一种可能的解决方案.     

Adsorption on Mesoporous Metal–Organic Frameworks in Solution: Aromatic and Heterocyclic Compounds

Adsorption and desorption play major roles in separations, purification of water, waste streams, liquid fuels, catalysis, biomedicine and chromatography. Mesoporous metal–organic frameworks (MOFs) with pore sizes 2–50 nm are particularly suitable for adsorption of organic compounds in solution. Tens of thousands of aromatic and heterocyclic compounds are major components of liquid fuels, feedstock for industrial synthesis, solvents, dyestuffs, agricultural chemicals, medicinal drugs, food additives, and so forth. This Review provides a systematization and analysis of studies on adsorption/desorption on mesoporous MOFs in solution and their underlying chemical mechanisms. The (in)stability of mesoporous MOFs in water is critically discussed. Adsorption capacity and selectivity are covered for organic dyes, medicinal drugs, major components of liquid fuels, and miscellaneous industrial chemicals. Ionic interactions, Brønsted acid–base interactions, hydrogen bonding, coordination bonding, π–π interactions, and non‐specific interactions are covered amongst adsorption mechanisms. The effects of post‐synthetic modifications of mesoporous MOFs on their stability, adsorption capacity, selectivity, and mechanisms of adsorption and desorption are analyzed. To encourage research in this quickly growing field, we identify “niches” for which no application‐oriented and/or mechanistic studies were reported. Perspectives and limitations of a wide use of mesoporous MOFs as industrial sorbents are discussed.     

顶空气相色谱法测定工作场所空气中的乙酸乙酯

采用顶空气相色谱法测定工作场所空气中的乙酸乙酯。气态乙酸乙酯用活性炭管吸附,二氯甲烷解吸,顶空进样,HP–FFAP毛细管柱分离,FID检测器测定,峰面积定量。乙酸乙酯的质量浓度在1.76~880.0μg/m L范围内与色谱峰面积呈良好的线性,相关系数r=0.999 4。不同浓度样品批内测定结果的相对标准偏差为1.34%~3.61%(n=7),批间测定结果的相对标准偏差为1.04%~4.78%(n=7),加标回收率为91.02%~100.29%,方法检出限为0.32μg/m L,解吸效率为91.28%~95.19%。对于100 mg活性炭,乙酸乙酯的穿透容大于2.2 mg,当其浓度在17.6~17 600 mg/m3时,采样效率为91.23%~97.40%,常温下可以保存10 d。该方法各项指标均达到《工作场所空气中有毒物质检测方法研制规范》的要求,适用于工作场所空气中乙酸乙酯的现场监测。     

几种常用激光解吸电离/质谱基质的基质簇峰行为研究

以常用于DNA分析的基质3-羟基吡啶甲酸(3-HPA),以及常用于高分子聚合物分析的基质2-(4-羟基苯基偶氮)苯甲酸(HABA)、反式-3-吲哚基丙烯酸(IAA)和1,8,9-三羟基蒽(Dithranol)为研究对象,考察了基质溶剂、浓度及激光强度对基质本身在激光解吸电离/质谱(LDI/MS)过程中产生基质簇峰的影响,对基质簇峰可能形成的过程进行了推测,并对各基质簇峰进行了归属,提出了基质簇离子峰m/z值遵循的计算公式。     

Square‐Wave Voltammetry of Electroinactive Surfactants

Under the influence of previously published and some new theoretical results, potential‐ dependent adsorption and desorption of model electroinactive surfactants Triton X‐100 (T‐X‐100 or polyethylene glycol p‐(1,1,3,3‐tetramethylbutyl)‐phenyl ether) and sodium dodecyl sulfate (SDS) on the static mercury drop electrode (SMDE) were studied by square‐wave voltammetry (SWV). Although (according to the theory) the resulting current – potential curve should consist of two highly separated peaks, only desorption signal could be seen on each experimentally obtained voltammogram, most probably because of the limitations concerning the available potential range. Different properties of the recorded peak are in good agreement with the theory indicating that square‐wave voltammetry could be treated as a potential tool for tensammetric studies of electroinactive surface active substances.     

Li_4SiO_4陶瓷小球水解吸行为实验研究

采用程序升温热解吸(TPD/TDS)方法对Li4SiO4陶瓷小球的水解吸行为进行了实验研究。结果表明:水解吸过程中主要存在四个解吸峰;其中100℃附近的峰可解释为物理吸附水;150,250,400℃附近的峰可分别解释为以氢键、Li-OH和Si-OH配位键形式存在的化学吸附水。氚的释放与水的解吸几乎同步进行,且氚的释放形式主要为氚水(HTO),据此推测,氚水可能存在三种释放机制:(1)-OT+H2O→-OH+HTO;(2)-OH+-OH→H2O,-OT+H2O→-OH+HTO;(3)-OT+-OH→HTO。     

飞秒激光辐射纳米薄膜脱附的能量输运机理研究

从微观能量传输角度,对飞秒脉冲激光的辐射传热及其产生的金属薄膜吸附层分子脱附过程的能量输运机理进行了研究。以非平衡态传热和随机过程理论为基础,建立了描述吸附分子脱附过程的数学模型;并分别对单脉冲与双脉冲飞秒激光辐射下,金属Ru基体表面层的电子和声子的温度分布、吸附层分子CO的脱附概率分布进行了数值模拟。其结果与实验规律相符,为飞秒脉冲激光应用于微机电系统中杂质脱附提供了重要信息。     

含酮基团对煤焦异相还原NO的影响

基于量子化学密度泛函理论和过渡态理论研究了含酮基团对煤焦异相还原NO的影响及其产物发生氧脱附的微观反应机理。计算结果表明，NO更易于吸附在含酮基团煤焦表面。椅形含酮基团强化了煤焦异相还原NO；锯齿形含酮煤焦表面与NO异相反应决速步能垒值（495.45 kJ/mol）大于锯齿形纯碳基煤焦表面与NO决速步能垒值（331.32 kJ/mol），基于锯齿形含酮煤焦模型中的氧浓度不在利于NO还原的范围内而不易于NO的还原。中间产物P1在无CO存在情况下，较纯碳基煤焦表面更易于发生氧脱附而产生表面缺陷；在CO存在条件下，含酮煤焦表面为氧脱附过程提供自由活性位点，降低了过程能垒消耗。     

Dynamic release process of pollutants during suspended sediment transport in aquatic system

Pollutants release is highly consistent with suspended sediment concentration （SSC） in water column, especially during re-suspension and transport events. The present research focuses on pollutant dynamic release from re-suspended sediment, especially the vertical distribution relationship between them. The sediment erosion experiments on a series of uniform flow are conducted in a circulate flume. Reactive tracer （phosphorus） is used as the contaminant in fine-grained sediments to identify the release characteristic length and time. Experimental results show that the flow condition near-bed depends on the sediment surface roughness. The region with high turbulent intensities corresponds to a high concentration sediment layer. In addition, the SSC decreases with the distance, water depth, and particle grain size. The sediment in a smaller grain size takes much more time to reach equilibrium concentration. Total phosphorus （TP） concentration changes along the water depth as SSC in the initial re-suspension stage, appearing in two obvious concentration regimes： the upper low-concentration layer and the high-concentration near-bottom layer. This layered phenomenon remains for about 3 hours until SSC distri- bution tends to be uniform. Longitudinal desorption plays an important role in long-way transport to reduce the amount of suspended sediment in water column.